LP Hero Headline
Over Two Lines

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua.

Webinar

Avoid Electrical Panel Design Errors

On-Demand

When selecting panel components, it’s often impossible to tell if they are correct until the manufacturing process begins. With a direct connection between the circuit diagram and panel layout such errors are recognized much earlier and thereby avoided. Precisely calculated wire lengths with checked wire cross-sections enables wires to be labeled and assembled in advance. This leads to a dramatic reduction in wiring time. Interfaces to labeling systems, drilling and milling machines as well as the automated cutting of cable ducts and mounting rails delivers additional rationalization potential.

Please join us for this technical webinar where panel design will be discussed and demonstrated by using a connected circuit and panel layout solution – E3.panel.

Length: 30 minutes

Watch Now

Fill in the form and we will send you an EMAIL containing a link to watch this webinar.

*This webinar is only available in North America

Webinar Details

In this webinar, you’ll learn:

  • Finding and adding parts from the web to the library
  • Setting up a simulation scenario using the LTSpice integration
  • Competing simulation results and tuning the performance
  • Sending to manufacturing and comparing the layouts in 3D

Who should attend:

Electronics engineers, test engineers, quality assurance, sourcing managers, engineering managers.

Speakers:

 Name:Wilmer Companioni

 Title: Technical Marketing Manager, Zuken USA

 Biography: Wilmer joined Zuken recently and prior to Zuken was Technical Marketing Manager for a passive component manufacturer and is also experienced in mobile device engineering with a brief stopover in sales. One of Wilmer’s main interests is to demystify electronic concepts and make them accessible and relevant to everyone.


 

Main Text + Form Headline
Over two lines

Supporting Text - lectus at exmale suada viverra. Sed vel ante orci. Fusce sit amet purus nec est venenatis blandit eu sit amet dui. Nunc hendre.

Donec vel eros orci. Aliquam nec interdum erat, nec congue erat. Nullam elementum nec odio ac accumsan. Vivamus ligula ipsum, faucibus et dolor eget, tempor laoreet eros.

Register Title

Intro text - lectus at exmale suada viverra. Sed vel ante orci. Fusce sit amet purus nec est venenatis

In this webinar, you’ll learn:

  • How to create and prepare the harness for simulation in E3.serie
  • How to transfer harness information to Ansys EMA3D
  • How to use the harness information in Ansys EMA3D to set up the simulation
  • How to simulate various electromagnetic effects on the aircraft that couple to the harness wiring
  • How to interpret the results and apply mitigations to adverse effects

Who should attend:

Electromagnetic Compatibility (EMC) Engineers

Electromagnetic Environmental Effects (E3) Engineers

Electrical Engineers, Architecture Engineers

Engineering Managers

Wire Harness Design Engineers

Simulation Engineers

Test Engineers

Quality Managers

Form Title 2:

Lectus at exmale suada viverra. Sed vel ante orci. Fusce sit amet purus dui.

Form Title 3:

Lectus at exmale suada viverra. Sed vel ante orci. Fusce sit amet purus dui.

Form Title 4:

Lectus at exmale suada viverra. Sed vel ante orci. Fusce sit amet purus dui.

Features Headline Over
Two Lines

Feature Headline 1 Over Two Lines

Supporting Text - lectus at exmale suada viverra. Sed vel ante orci. Fusce sit amet purus ne venenatis blandit eu sit amet dui.

Feature Headline 2 Over Two Lines

Supporting Text - lectus at exmale suada viverra. Sed vel ante orci. Fusce sit amet purus ne venenatis blandit eu sit amet dui.

Feature Headline 3 Over Two Lines

Supporting Text - lectus at exmale suada viverra. Sed vel ante orci. Fusce sit amet purus ne venenatis blandit eu sit amet dui.

Feature Headline 4 Over Two Lines

Supporting Text - lectus at exmale suada viverra. Sed vel ante orci. Fusce sit amet purus ne venenatis blandit eu sit amet dui.

Speakers:

Supporting Text - lectus at exmale suada viverra. Sed vel ante orci. Fusce sit amet purus ne venenatis blandit eu sit amet dui.




eCADSTAR_logos_white-300.jpg

eCADSTAR

See how eCADSTAR combines the power of modern Electronic Design Automation (EDA) software and the flexibility of the internet.

A new internet connected PCB design platform. Get 30-day eCADSTAR evaluation license with full features.

Main Text Only Headline
Over Two Lines

Lectus at exmale suada viverra. Sed vel ante orci. Fusce sit amet purus nec est venenatis blandit eu sit amet dui. Nunc hendre. lectus at exmale suada viverra. Sed vel ante orci. Fusce sit amet purus nec est venenatis blandit eu sit amet dui. Nunc hendre.

Donec vel eros orci. Aliquam nec interdum erat, nec congue erat. Nullam elementum nec odio ac accumsan. Vivamus ligula ipsum, faucibus et dolor eget, tempor laoreet eros.

Speakers

Sanu Warrier:
Technical Marketing Manager

Sanu Warrier is a Technical Marketing Manager, helping customers find effective solutions to their design challenges. His work focuses on eliminating inefficiencies, improving design processes, and reducing costs to improve competitive advantages. He is a self-professed foodie and loves to dabble in gastronomic alchemy as often as possible.

Tim McDonald, PhD:
President, EMA, Inc.

Tim McDonald is President at Electro Magnetic Applications, Inc. (EMA). EMA is a leading developer of technologies for engineering simulation. EMA’s engineering specialty is applied electromagnetics. In this domain, EMA provides software and services to promote the design, certification, and performance of our customers’ products. Tim currently serves as product manager for EMA3D®. He supports EMA3D® users around the world from multiple industries.

Feature Headline 3 Over Two Lines

Supporting Text - lectus at exmale suada viverra. Sed vel ante orci. Fusce sit amet purus ne venenatis blandit eu sit amet dui.

Feature Headline 4 Over Two Lines

Supporting Text - lectus at exmale suada viverra. Sed vel ante orci. Fusce sit amet purus ne venenatis blandit eu sit amet dui.

Speaker 1:
Sanu Warrier

Title: Technical Marketing Manager, Zuken USA

Biography:

Sanu Warrier is a Technical Marketing Manager, helping customers find effective solutions to their design challenges. His work focuses on eliminating inefficiencies, improving design processes, and reducing costs to improve competitive advantages. He is a self-professed foodie and loves to dabble in gastronomic alchemy as often as possible.


Speaker 2:
Tim McDonald, PhD

Title: President, EMA, Inc.

Biography:

Tim McDonald is President at Electro Magnetic Applications, Inc. (EMA). EMA is a leading developer of technologies for engineering simulation. EMA’s engineering specialty is applied electromagnetics. In this domain, EMA provides software and services to promote the design, certification, and performance of our customers’ products. Tim currently serves as product manager for EMA3D®. He supports EMA3D® users around the world from multiple industries.

Tim holds a Ph.D. in Applied Physics and Applied Math from Columbia University in the City of New York.

Tim previously led consulting engagements for NASA and DoD major primes pertaining to specialty engineering of critical systems, development of novel solutions to electromagnetic compatibility problems, and the execution of major programs that require verification of electromagnetic environmental effects.


In this webinar, you’ll learn:

  • Find out how to combine circuit diagram and panel layout with a direct link between E3.schematic / E3.cable and E3.panel
  • How to create a panel layout, place components and prevent collisions, switching between 2D and 3D views
  • How to use intelligent components to select the correct wire diameter and optimize the routing and filling of cable ducts
  • How to route and calculate the wire length automatically, including when moving placed components
  • Working with variants and options
  • Exporting the 3D-panel layout to mechanical CAD systems
  • Interfaces for milling & drilling for mounting plates and cabinet components
  • Interfaces to terminal strip configuration programs and labeling systems.

Who should attend:

  • Design engineers
  • Cable and harness engineers
  • Engineering managers
  • Product managers
  • Manufacturing engineers

Form Headline Over
Two Lines

Introduction Title

Intro text - lectus at exmale suada viverra. Sed vel ante orci. Fusce sit amet purus nec est venenatis. Lectus at exmale suada viverra.